大财神双组份打胶机是中空玻璃第二道密封（结构密封）的核心设备。但很多人不知道，密封胶A、B组分的混合均匀度，直接决定中空玻璃的寿命——混合不均，胶体局部不固化或固化不完全，轻则密封失效，重则玻璃脱落。

大财神The two-component gluing machine is the core equipment for the second sealing (structural sealing) of insulating glass. But many people do not know that the uniformity of the mixing of components A and B of the sealant directly determines the lifespan of the insulating glass - uneven mixing, partial or incomplete solidification of the colloid, light sealing failure, heavy glass detachment.

混合比可调：7:1到14:1灵活切换。

大财神Mixing ratio adjustable: flexible switching from 7:1 to 14:1.

优良双组份打胶机允许调整7:1到14:1的混合比率。不同品牌、不同型号的密封胶对混合比例要求不同，机器可调意味着可以适配多种胶品，不受单一供应商捆绑。

The high-quality two-component gluing machine allows for adjusting the mixing ratio from 7:1 to 14:1. Different brands and models of sealants have different requirements for mixing ratios. Machine adjustability means that it can adapt to multiple types of sealants without being bound by a single supplier.

蝴蝶法：混合均匀度的“体检”标准。

Butterfly method: a "physical examination" standard for mixing uniformity.

涂胶前，建议用蝴蝶法测试密封胶的混合均匀性。具体做法是取混合后的胶样铺开，观察颜色是否均匀一致，有无条纹或斑点。这是行业通行标准，也是验证打胶机混合效果的非常直观方法。如果蝴蝶法测试不通过，打出来的胶就是“问题胶”，中空玻璃出厂后密封失效风险出众。

Before applying glue, the butterfly method must be used to test the uniformity of the sealant mixture. The specific method is to take the mixed adhesive sample and spread it out, observing whether the color is uniform and consistent, and whether there are stripes or spots. This is the industry standard and the most intuitive way to verify the mixing effect of the glue machine. If the butterfly test fails, the glue produced will be the "problem glue", and the risk of sealing failure of the insulated glass after leaving the factory is extremely high.

供胶系统：两套独立系统，切换不用等。

Glue supply system: Two independent systems, no need to wait for switching.

大财神出众双组份打胶机配备两套独立供胶系统，不同密封胶切换方便。中空玻璃生产线用的密封胶通常有聚硫胶和硅酮胶两种，配方不同、颜色不同，不能混用。双系统配置意味着换胶不需要停机清洗整个管路，几分钟完成切换。

The high-end two-component gluing machine is equipped with two independent glue supply systems, making it easy to switch between different sealants. The sealant used in the production line of insulating glass usually includes two types: polysulfide adhesive and silicone adhesive, with different formulas and colors, and cannot be mixed. The dual system configuration means that changing the glue does not require stopping the machine to clean the entire pipeline, and the switch can be completed in a few minutes.

大财神涂胶参数：深度、宽度、速度合理可控。

大财神Glue parameters: precise and controllable depth, width, and speed.

大财神打胶深度、宽度、速度直接影响密封效果。先进机型具备自动检测打胶深度功能，根据玻璃厚度和铝条高度自动调节打胶速度，确保胶体填充到位但不过量。涂胶速度一般可达5-30m/min，涂胶深度3-19mm、宽度6-30mm可调，适配不同规格中空玻璃。

大财神The depth, width, and speed of gluing directly affect the sealing effect. Advanced models have the function of automatically detecting the depth of glue application, adjusting the glue application speed according to the thickness of the glass and the height of the aluminum strip to ensure that the glue is filled in place but not excessively. The glue application speed can generally reach 5-30m/min, the glue application depth is 3-19mm, and the width is adjustable from 6-30mm, suitable for different specifications of insulated glass.

选型提醒： 双组份打胶机对胶泵、混胶器、液压系统的要求出众。现场试机时务必实际打胶测试，观察胶条是否连续均匀、有无气泡和断层。带一组标准尺寸玻璃去试打，是非常靠谱的选型方式。

大财神Selection reminder: The two-component gluing machine has extremely high requirements for the glue pump, mixer, and hydraulic system. During on-site machine testing, it is necessary to conduct actual adhesive testing and observe whether the adhesive strip is continuous and uniform, whether there are bubbles and faults. Bringing a set of standard size glass for trial molding is the most reliable way of selection.

本文由双组份打胶机友情奉献.更多有关的知识请点击:http://nmjfr.com真诚的态度.为您提供为多维度的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

大财神This article is a friendly contribution from a two-component glue machine For more information, please click: http://nmjfr.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.